Recently, a 900-ton-class transport and racking equipment manufactured by China Railway Engineering Machinery Research and Design Institute Co., Ltd. and Shaanxi Construction Machinery Co., Ltd. (abbreviated as: Construction Machinery) to fill the domestic gap, in Hefei, Quanjiao County, Anhui Province - Nanjing) High-speed railway passenger dedicated line construction, the first successful realization of the 32-meter 900-ton double-line full-hole box girder erection.
The 900-ton transport frame equipment is composed of YL900 type beam truck and JQ900A bridge machine equipment. It is a large-scale complete set of special equipment specially developed for high-speed railway construction. 1 The main function of the YL900 type beam truck is to transport the large box girder from the beam yard to the bridging site, with a single transport capacity of 900 tons. 2JQ900A bridging machine is mainly used for erection of double-line precast concrete box girder below 32 meters. It can lift 900 tons of precast concrete box girder from the beam truck and place it on the pier position.
The use of this equipment to erect a 32-meter double-line full-hole box girder is the first time in the history of China's railways. The whole line will be erected with 434-hole 32-meter and 24-meter-size box girder. The equipment was successfully produced and the railway was built for the construction machinery. The bridge erecting machine has accumulated experience and is of great significance for the revitalization of our national industry.
The total length of the Hening (Hefei-Nanjing) high-speed railway constructed by the China Railway Second Bureau is 166 kilometers, with a total investment of 4.4 billion yuan and a design speed of 200 kilometers per hour.
The Galvanzied Water tanks are used to provide storage of water for use in many applications, drinking water, irrigation agriculture, fire suppression , agricultural farming, both for plants and livestock, chemical manufacturing, food preparation as well as many other uses.
The Panel size : 1000x1000mm, 500x500mm, 1000x500mm
Thickness :2mm, 3mm , 4mm, 5mm, 6mm
Use Q235A steel panel and press into 1220x1220mm, 1000x1000mm and 1000x500mm standard panel, make holes around Water Tank, through coated zinc surface treatment, and install on site. When installation, bolts and nuts collection and silicon sealing gaskets among panels.
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.
All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water .The top panel is supported by top panel support ,which shall be made of stainless steel grade 304 or 316 material according to requirement .
Hot Dip Galvanzied Water Tank
Hot Dip Galvanzied Water Tank
Shandong Hiking International Commerce Group Co.,Ltd , https://www.constructionfrp.com